keepalived+nginx高可用怎么实现

1.keepalived介绍

keepalived最初是专为lvs负载均衡软件设计的，用来管理并监控lvs集群系统中各个服务节点的状态，后来又加入了实现高可用的vrrp功能。keepalived除了能够管理lvs软件外，还能支持其他服务的高可用解决方案。

keepalived通过vrrp协议实现高可用功能的。vrrp（virtual router redundancy protocol）虚拟路由冗余协议。vrrp出现的目的就是为了解决静态路由单点故障问题，它能保证当个别节点宕机时，整个网络可以不间断地运行。

2.keepalived高可用故障转移原理

keepalived高可用服务之间的故障转移，是通过vrrp来实现的。在keepalived服务工作时，主master节点会不断地向备节点发送（多播的方式）心跳消息，用来告诉备backup节点自己还活着。

　　当主节点发生故障时，无法给备节点发送心跳消息，如果备节点无法继续检测到来自主节点的心跳。就会调用自身的接管程序，接管主节点的ip资源和服务。当主节点恢复时，备节点又会释放主节点故障时自身接管的ip资源和服务，恢复到原来的备用角色

3.安装nginx

3.1.主节点（192.168.80.22）

3.1.1.安装编译工具和库文件

yum -y install make zlib zlib-devel gcc-c++ libtool openssl openssl-devel

3.1.2.安装pcre

#进入目录 cd /usr/local/develop/anginx #上传安装文件并解压 tar -zxvf pcre-8.38.tar.gz #进入安装目录 cd pcre-8.38 #检查配置 ./configure #编译、安装 make && make install #查看pcre版本 pcre-config --version

3.1.3.安装nginx

#进入目录 cd /usr/local/develop/anginx #上传安装文件，并解压 tar -zxvf nginx-1.8.1.tar.gz #进入安装目录 cd nginx-1.8.1 #检查配置 ./configure --prefix=/usr/local/develop/anginx/webserver/nginx --with-http_stub_status_module --with-http_ssl_module --with-pcre=/usr/local/develop/anginx/pcre-8.38 #编译安装 make && make install #查看nginx版本 /usr/local/develop/anginx/webserver/nginx/sbin/nginx -v -------------------------------------------------------- [root@hadoop02 webserver]# /usr/local/develop/anginx/webserver/nginx/sbin/nginx -v nginx version: nginx/1.8.1 #配置nginx（检查） /usr/local/develop/anginx/webserver/nginx/sbin/nginx -t #nginx管理命令 /usr/local/develop/anginx/webserver/nginx/sbin/nginx # 启动 nginx /usr/local/develop/anginx/webserver/nginx/sbin/nginx -s stop # 停止 nginx /usr/local/develop/anginx/webserver/nginx/sbin/nginx -s reload # 重新载入配置文件 /usr/local/develop/anginx/webserver/nginx/sbin/nginx -s reopen # 重启 nginx

3.1.4.nginx基础配置

vi nginx.conf #user nobody; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; #添加tomcat列表，真实应用服务器都放在这 upstream tomcat_pool{ #server tomcat地址:端口号 weight表示权值，权值越大，被分配的几率越大; server 192.168.80.22:8080 weight=4 max_fails=2 fail_timeout=30s; server 192.168.80.22:8081 weight=4 max_fails=2 fail_timeout=30s; } server { listen 80; server_name tomcat_pool; #charset koi8-r; #access_log logs/host.access.log main; location / { #root html; #index index.html index.htm; proxy_pass http://tomcat_pool; #转向tomcat处理 proxy_set_header host $host; proxy_set_header x-real-ip $remote_addr; proxy_set_header x-forwarded-for $proxy_add_x_forwarded_for; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } }

3.2.备节点（192.168.80.21）

说明：安装方式同nginx主节点。

4.安装keepalived

4.1.主节点（192.168.80.22）

#安装keepalived yum install keepalived -y #启动keepalived服务 /etc/init.d/keepalived start ------------------------------------------- [root@hadoop02 anginx]# /etc/init.d/keepalived start 正在启动 keepalived： [确定] [root@hadoop02 anginx]# ps -ef |grep keepalived root 15723 1 0 00:59 ? 00:00:00 /usr/sbin/keepalived -d root 15724 15723 0 00:59 ? 00:00:00 /usr/sbin/keepalived -d root 15725 15723 0 00:59 ? 00:00:00 /usr/sbin/keepalived -d root 15731 15622 0 00:59 pts/1 00:00:00 grep keepalived [root@hadoop02 anginx]# #设置开机自启动 echo "/etc/init.d/keepalived start" >>/etc/rc.local #关闭keepalived服务 /etc/init.d/keepalived stop #编辑keepalived配置文件 vi /etc/keepalived/keepalived.conf ----------------------------------------------------------- ! configuration file for keepalived global_defs { notification_email { acassen@firewall.loc failover@firewall.loc sysadmin@firewall.loc } notification_email_from alexandre.cassen@firewall.loc smtp_server 192.168.200.1 smtp_connect_timeout 30 router_id lb01 } vrrp_instance vi_1 { state master interface eth1 virtual_router_id 55 priority 150 advert_int 1 authentication { auth_type pass auth_pass server123 } virtual_ipaddress { 192.168.80.100 dev eth1 label eth1:1 } } ...........................................................

关于配置说明：

• 【router_id】 是路由标识，在一个局域网里面应该是唯一的

• 【vrrp_instance vi_1】{...}这是一个vrrp实例，里面定义了keepalived的主备状态、接口、优先级、认证和ip信息

• 【state】 定义了vrrp的角色

• 【interface】定义使用的接口，这里我的服务器用的网卡都是eth1

• 【virtual_router_id】是虚拟路由id标识，一组的keepalived配置中主备都是设置一致

• 【priority】是优先级，数字越大，优先级越大，

• 【auth_type】是认证方式

• 【auth_pass】是认证的密码

• 【virtual_ipaddress】 ｛...｝定义虚拟ip地址，可以配置多个ip地址，这里我定义为192.168.80.100，绑定了eth1的网络接口，虚拟接口eth1:1

4.2.备节点（192.168.80.21）

#安装keepalived yum install keepalived -y #启动keepalived服务 /etc/init.d/keepalived start ------------------------------------------- [root@hadoop02 anginx]# /etc/init.d/keepalived start 正在启动 keepalived： [确定] [root@hadoop02 anginx]# ps -ef |grep keepalived root 15723 1 0 00:59 ? 00:00:00 /usr/sbin/keepalived -d root 15724 15723 0 00:59 ? 00:00:00 /usr/sbin/keepalived -d root 15725 15723 0 00:59 ? 00:00:00 /usr/sbin/keepalived -d root 15731 15622 0 00:59 pts/1 00:00:00 grep keepalived [root@hadoop02 anginx]# #设置开机自启动 echo "/etc/init.d/keepalived start" >>/etc/rc.local #关闭keepalived服务 /etc/init.d/keepalived stop #编辑keepalived配置文件 vi /etc/keepalived/keepalived.conf ----------------------------------------------------------------- ! configuration file for keepalived global_defs { notification_email { acassen@firewall.loc failover@firewall.loc sysadmin@firewall.loc } notification_email_from alexandre.cassen@firewall.loc smtp_server 192.168.200.1 smtp_connect_timeout 30 router_id lb02 } vrrp_instance vi_1 { state backup interface eth1 virtual_router_id 55 priority 100 advert_int 1 authentication { auth_type pass auth_pass server123 } virtual_ipaddress { 192.168.80.100 dev eth1 label eth1:1 } } .............................................................

5.测试

5.1.启动主备节点的keepalived服务

#在节点一执行（192.168.80.22） /etc/init.d/keepalived start ------------------------------------- [root@hadoop02 anginx]# ps -ef |grep keepalived root 15788 1 0 01:09 ? 00:00:00 /usr/sbin/keepalived -d root 15790 15788 0 01:09 ? 00:00:00 /usr/sbin/keepalived -d root 15791 15788 0 01:09 ? 00:00:00 /usr/sbin/keepalived -d root 15807 15622 0 01:33 pts/1 00:00:00 grep keepalived [root@hadoop02 anginx]# #在节点二执行（192.168.80.21） /etc/init.d/keepalived start --------------------------------------- [root@hadoop01 ~]# ps -ef |grep keepalived root 11542 1 0 01:30 ? 00:00:00 /usr/sbin/keepalived -d root 11544 11542 0 01:30 ? 00:00:00 /usr/sbin/keepalived -d root 11545 11542 0 01:30 ? 00:00:00 /usr/sbin/keepalived -d root 11550 11512 0 01:33 pts/1 00:00:00 grep keepalived [root@hadoop01 ~]#

5.2.通过虚ip访问服务

http://192.168.80.100/session-redis-demo/

5.3.停止主节点keepalived服务

#在节点一执行（192.168.80.22） /etc/init.d/keepalived stop #观察备节点变化 ip addr ------------------------------------------- [root@hadoop01 ~]# ip addr 1: lo: <loopback,up,lower_up> mtu 65536 qdisc noqueue state unknown link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <broadcast,multicast,up,lower_up> mtu 1500 qdisc pfifo_fast state up qlen 1000 link/ether 00:50:56:38:e5:46 brd ff:ff:ff:ff:ff:ff inet 192.168.80.21/24 brd 192.168.80.255 scope global eth1 inet 192.168.80.100/32 scope global eth1:1 inet6 fe80::250:56ff:fe38:e546/64 scope link valid_lft forever preferred_lft forever [root@hadoop01 ~]#

5.4.继续通过虚ip访问服务

http://192.168.80.100/session-redis-demo/

6.keepalived+nginx整合

说明：编写nginx守护脚本，如果nginx服务出现故障，则停止当前节点的keepalived服务。自动切换到备用节点。

6.1.编写nginx守护脚本

vi nginx_check.sh -------------------------------------- #!/bin/bash while true do if [ $(netstat -tlnp|grep nginx|wc -l) -ne 1 ] then /etc/init.d/keepalived stop fi sleep 2 done #给脚本授权 chmod u+x nginx_check.sh #执行脚本 nohup /usr/local/develop/anginx/shell/nginx_check.sh &

6.2.停止主节点nginx服务

#停止主节点nginx服务 /usr/local/develop/anginx/webserver/nginx/sbin/nginx -s stop #查找进程 [root@hadoop02 ~]# ps -ef |grep nginx root 15915 1 0 01:51 ? 00:00:00 /bin/bash /usr/local/develop/anginx/shell/nginx_check.sh root 16516 15753 0 01:54 pts/5 00:00:00 grep nginx [root@hadoop02 ~]# #观察备用节点变化【服务正常】 ip addr -------------------------------------- [root@hadoop01 shell]# ip addr 1: lo: <loopback,up,lower_up> mtu 65536 qdisc noqueue state unknown link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <broadcast,multicast,up,lower_up> mtu 1500 qdisc pfifo_fast state up qlen 1000 link/ether 00:50:56:38:e5:46 brd ff:ff:ff:ff:ff:ff inet 192.168.80.21/24 brd 192.168.80.255 scope global eth1 inet 192.168.80.100/32 scope global eth1:1 inet6 fe80::250:56ff:fe38:e546/64 scope link valid_lft forever preferred_lft forever [root@hadoop01 shell]# #再次重新启动主节点nginx和keepalived服务 /usr/local/develop/anginx/webserver/nginx/sbin/nginx /etc/init.d/keepalived start

以上就是keepalived+nginx高可用怎么实现的详细内容，更多请关注主机测评网其它相关文章！